Zoeller sump pumps range from residential to commercial sump pumps, deep well submersible pumps and heavy sewage lift pumps. Here we take a look at a selection of the most popular.
About Zoeller
The Zoeller sump pump has the same basic design that has been manufactured for 20+ years, it's tried and true. Zoeller sump pumps are so well known replacement parts are readily available at your local plumbing supply store. This is a really important point. There are many less known brands that are enticing because of price, but that could mean expensive. If you can't get replacement parts for them, or you have to wait weeks to get them, what happens in the meantime? You have a problem which must be resolved and quickly.
Customer service is important and you can expect excellent customer support from Zoeller to help solve any pump problems you may have. How much is that worth? Most plumbers you talk to will recommend a Zoeller sump pump simply because Zoeller is considered to be the "industry standard" for relability. In addition to great help you can custom design the correct sizing for your particular need with free consultation.
Zoeller M53 Automatic Mighty Mate
One of Zoeller's best sellers. Ideal for residential and light commercial applications. The Zoeller M53 sump pump delivers all the power needed to drain flooded excavations, basements, window wells, construction sites, and swimming pools to name a few. Features include a nonclog vortex impeller and a screenless suction inlet, enabling the Zoeller M53 to be used in areas where conventional sump pumps would clog or freeze up due to the accumulation of light debris.
The single-phase motor on this pump is permanently-lubricated for continuous use and hermetically sealed to ensure a long service life and dependable operation. Rated at 1/3 HP the M53 has a cast iron switch case, motor, and pump housing, a thermoplastic base, and an engineered plastic impeller with metal insert.
Pump capacity is 43 gallons (163L)/minute, (maximum) passes half-inch solids, and shares a 1.5" discharge. Single phase 115 volt with a 9.5 amp draw. Off point 3 Inches, on point 7 1/4 Inches. The Zoeller Sump Pump has a powder-coated green epoxy finish and stainless steel screws, guard, and switch arm to limit rust and corrosion.
Zoeller M57 Basement High Capacity Sump Pump
The Zoeller M57 is basically the same as the M 53 with the same dimensions with the same power but has a cast iron base with a cast iron impeller instead of a plastic impeller as on the M 53. Off Point 3 1/4 Inches, On Point 8 1/2 Inches. Water Flow at 15 Feet of Head 19 GPM, Water Flow at 5 Feet of Head 43 GPM.
A very popular Zoeller Sump Pump the reliable M267 automatic sewage pump is rated at 2 HP. With a 2 inch discharge it can pass 2''solids. A single phase motor rated at 120 volts with a 10.4 ampere draw. Complete with with an attached float that activates a Nema 6 two pole mechanical float switch. High on setting 12'' Low off at 4''. With a critical component such as a sewage pump check out a battery sump pump backup sysytem.
For a price cick on image
Zoeller Pump Maintainance Tips
As with any mechanical system, it needs regular maintenance. Check the switch and replace it every 3 years or sooner if your unit is running constantly. While you're at it, check and clean the float, inspect the check valve, and make sure the impeller is clear and spinning freely. No sump pump should ever be considered a maintenance free item. If your system is active, proper maintenance and periodic monitoring is the key to long life and dependability.
The question often that comes up the most is "how long will my sump pump last? The life span of a pump could be as little as 2 years to more than 12 years it all depends upon how much use the pump is receiving. A sump pump that runs constantly is going to wear out faster. If condensation is a problem or you want to remove condensate from your high efficiency furnace see the little giant condensate pump to solve your problem.
For "normal" use 8 years is considered to be the average life of a sump pump. The other factor is how well your sump pump is maintained, poor maintainence will shorten the life of anything, sump pumps included. For more peace of mind in the event of a pump failure consider a Zoeller water powered sump pump back up system.
What Is The Cause Of Sump Pump Failure?
The leading cause for a sump pump to fail is a power failure. The second most common is a faulty float switch, from sticking or just plain worn out. Check the switch requently to make sure it is working properly along with the float assembly to ensure the float arm moves freely. Clean the impeller blade of any debris and make sure there is no blockage of the screen at the discharge pipe or anywhere in the discharge drainage.
